For a pool owner, keeping the water safe is generally the first and foremost priority and rightly so. One of the many ways to keep the water safe is to maintain the right pH levels. pH levels too high or too low can be harmful to whoever is exposed to the pool water. This is why, as a pool owner, you should keep a check on pH levels at all times and if you find it to be too low then take no time to make efforts to bring it back to normal. After all, it is about human safety and there is no way you can choose to neglect the matter.
Here are all steps to raise pH levels of pool water.
Let’s get started!
Check Pool Chemistry
If you haven’t checked pool chemistry then do it already because only then you can find out the exact level of pH in pool water. This will compel you to take the necessary steps to fix the pH level. Pool chemistry can be checked by investing in a high-quality test kit designed for this very purpose. You should know that the right pH levels fall between 7.2 and 7.6. 7.4 is considered to be the optimum level. You can easily find it across any online market and have it delivered to your address without any hassle.
Check the Amount of Water in the Pool
If you got the pool made right in front of your eyes then you must know the amount of water in it. If you don’t then you need to calculate in order to successfully complete the procedure. You can either call the experts or calculate it yourself by using a simple formula.
For rectangular pools, the formula is: Length x Width x Depth x 7.5
If the pool has varying depths then go for an average depth.
For round pools, use this formula: diameter x diameter x depth x 5.9
Measure the Chemicals
The chemical used to raise pH levels in the pool is referred to as sodium carbonate. Therefore, it has to be in a perfect ratio to make the water safe for all swimmers. You need 6 ounces of it to raise 0.2 pH. However, keep in mind that these figures are for the swimming pools with 10,000 gallons of water.
Add the Chemical
Mix the calculated amount of sodium carbonate in five gallons of water. Blend it well and then start pouring it around the pool. It is recommended to keep the pump on while you are at it as it will enable the chemical to spread out evenly throughout the pool.
Now that you are done with all the steps, it is recommended to recheck the pH levels again just to be sure. If the pH levels still turn out to be below optimum levels then consider repeating the steps. Also, to keep your pool safe, you can buy stuff from online platforms such as Remco.